Please be advised that our online store uses cookie technology and at the same time does not automatically collect any information, except for the information contained in these files (so-called "cookies").
BLIXET B40-MS 3D printer
  • BLIXET B40-MS 3D printer

BLIXET B40-MS 3D printer

BLIXET B40-MS is a 3D printer from the MS series working in FFF technology with a working area of ​​310 x 320 x 490 mm. The device has ball-mounted spool feeders thanks to the low spool resistance, the B40 model can support 5 kg spools as standard.

Heads count
  • Single
  • Duo
Quantity

BLIXET B40-MS 3D printer

BLIXET B40-MS 3D printer

BLIXET B40-MS is a 3D printer from the MS (Modular - System) series working in FFF technology with a working area of ​​310 x 320 x 490 mm. The device has ball-mounted spool feeders, thanks to the low spool resistance, the B40 model can support 5 kg spools as standard. BLIXET B40-MS 3D printer allows you to retrofit the device with further elements. The B40-MS has new control electronics that allow full device diagnostics and control via WiFi. It has a built-in function for entering control commands as well as diagnostics and reading of calibration parameters.

BLIXET B40-MS 3D printer

BLIXET B40-MS

BLIXET B40-MS is a printer designed from the ground up using many years of experience in the production and sale of 3D printers in FFF (FDM) technology. The device has been designed to meet the needs of customers, whose requirements are not always specified when buying printers. After a long work with 3D printers, there is a need to retrofit the device with additional parameters, such as heating the chamber, platforms with the filament function. The design of the MS series devices has been constructed so that the printer can be retrofitted with further elements.

Automatic drying chamber for filaments

The BLIXET B40-MS 3D printer can be retrofitted with an automatic dehumidification system for the filament chamber with the function of moisture detection and removal outside the DRY FLOW ™ chamber. Installing such a system in the chamber or optional platform means that there is no need to dry the filaments, because the DRY FLOW ™ system will detect too much humidity and remove it outside the chamber in which the filaments are stored.

BLIXET B40-MS 3D printer

The 3D BLIXET B40-MS 3D printer can be retrofitted

The 3D BLIXET B40-MS printer can be retrofitted during the purchase process and after purchase. The device can be equipped with such modules as:

  • Chamber heating to 70 ° C or 120 ° C with full chamber insulation
  • Sero-motors with absolute encoder XY axis
  • Printer platform
  • Podium for printer with filament tray
  • Innovative system for automatic drying of the filament chamber with the function of humidity detection and removal outside the DRY FLOW ™ chamber
  • Extended warranty up to 60 months, price 15% of the device value for each subsequent year (including diagnostic service once a year and replacement of used components)
  • Adhesive pads for special materials
  • Vacuum table with adhesive pad (pressurized air supply required)
  • Additional external air filtration in the room, SYSTEM 8 filters with automatic measurement of humidity and particle concentration as well as filter wear (set of replacement cartridges included)
  • Personalization for specific materials (filaments) including production of materials to order and adaptation of the device for these materials to 15 kg spools depending on the type of filament together with the material feeding system

Data sheet

Print Technology
FFF (FDM)
Print temperature
Max. 500° C
Working area
310 x 320 x 490 mm
Filament diameter
1,75 mm / 2,85 mm
Layer resolution
50-400 microns (0.2-0.8 mm nozzles) standard module 300-1000 microns (0.6-1.4 mm nozzles) (Super-Fast ™ module for fast printing)
Build Plate
Heated, removable ceramic tile
Max Build Plate Temperature
160° C
Software
Simplify 3D, Cura, other
File Types
STL, OBJ, 3MF
Operating systems
Mac OS / Windows
Printhead
With its own cooling
Sensors
Magnetic material sensor
Table leveling
Automatic before each print / Manual cyclical
Rodzaj drukarki
FFF, FDM, LPD
Touchscreen
“5
Diameter of the nozzle
0.2 - 0.8 mm (standard module) 0.6 - 1.4 mm Module for quick prints (Super-Fast ™)
Current
230 V ~ 4 A 50/60 Hz
Power consumption
1000 W (heating the set) during operation ~ 300 W
Dimensions
880 x 590 x 1180 mm

Data sheet

Print Technology
FFF (FDM)
Print temperature
Max. 500° C
Working area
310 x 320 x 490 mm
Filament diameter
1,75 mm / 2,85 mm
Layer resolution
50-400 microns (0.2-0.8 mm nozzles) standard module 300-1000 microns (0.6-1.4 mm nozzles) (Super-Fast ™ module for fast printing)
Build Plate
Heated, removable ceramic tile
Max Build Plate Temperature
160° C
Software
Simplify 3D, Cura, other
File Types
STL, OBJ, 3MF
Operating systems
Mac OS / Windows
Printhead
With its own cooling
Sensors
Magnetic material sensor
Table leveling
Automatic before each print / Manual cyclical
Rodzaj drukarki
FFF, FDM, LPD
Touchscreen
“5
Diameter of the nozzle
0.2 - 0.8 mm (standard module) 0.6 - 1.4 mm Module for quick prints (Super-Fast ™)
Current
230 V ~ 4 A 50/60 Hz
Power consumption
1000 W (heating the set) during operation ~ 300 W
Dimensions
880 x 590 x 1180 mm

Specific References

You might also like

16 other products in the same category: