- New

MfgPro230 xS is a 3D printer working in SLS (Selective Laser Sintering) technology with a working area of 230 x 230 x 230 mm. The MfgPro230 xS is designed for the production of small production and engineering projects. You can buy a post-processing station with an EeezClean350 Depowdering station compressor.
MfgPro230 xS is a 3D printer working in SLS (Selective Laser Sintering) technology with a working area of 230 x 230 x 230 mm. The MfgPro230 xS is designed for the production of small production and engineering projects. The printer operates at a speed of up to 20 mm / hour, which reduces production time at the design and development stage.
The MfgPro230 xS 3D printer uses CO2 Selective Laser Sintering (SLS) technology, which allows the use of various materials made of plastics. The printing process consists in placing a layer of thermoplastic material and then melting it with a laser. This process repeats itself until the printing process is complete. The 3D models made are characterized by high precision and durability.
The printer is equipped with a removable tray module, which ensures high performance and easy operation of the device. After printing, the user can replace the print-ready tray with a new one to start printing immediately. This allows you to work more efficiently and provides a cleaner solution for powder removal.
The MfgPro230 xS 3D printer uses SLS (Selective Laser Sintering) technology, which consists in sintering successive layers of powdered material with a laser beam. A powdered polymer is placed on the working table of the 3D printer, on which the laser beam responsible for its selective melting is directed. The build plate then lowers and another layer of powder is applied. This process is repeated until the print is ready. SLS technology does not require the use of supports, which makes it possible to create objects with complex geometry that could not be obtained with the use of other technologies. Models made in SLS technology are characterized by high strength and durability.
The MfgPro230 xS 3D printer has an open material platform, which makes it an ideal choice for research institutions, among others.
The MfgPro230 xS allows for maximum efficiency and throughput while keeping the printing process low cost.
The 3D printer comes with a removable work tray module that enables users to print more efficiently and to a cleaner powder removal solution.
The MfgPro230 xS 3D printer is supported by two advanced software packages, Buildware and XYZprint AM, which allow you to directly handle the model synthesizing process and remotely plan projects.
MfgPro230 xS 3D printer works in SLS technology and allows the use of advanced materials. This allows you to print models with complex geometry that cannot be obtained with other technology. The printer is designed for the production of small production and engineering projects such as an intelligent parking sensor or an aquarium filter.
The sensor requires parts with high precision and resistance to moisture. The sensor is closed and buried in the ground while its top cover is exposed.
The filter required very accurate, watertight parts that would retain their shape and integrity after many days of use.
SLS technology is an ideal solution for the production of functional 3D models with complex geometry.
The XYZprinting company offers a comprehensive range of materials, allows you to find the right material for external components and model parts. MfgPro230 xS 3D printer supports materials such as sPro12W / sProTPU. For high speed production, sPro12W (Nylon 12 White) is the most used material in the laser sintering process. Provides strong and durable end-use parts.
The MfgPro230 xS 3D printer is supported by the two advanced software packages Buildware and XYZprint AM SLS . XYZprint AM SLS software is designed for the highest productivity and high efficiency, which allows users to remotely plan projects on a 3D printer and check print files. XYZprint AM SLS allows you to calculate the cost of each printout and has a history of cost estimates that helps you track and compare previous data for more efficient material management. The software is compatible only with the MfgPro230 xS printer. Buildware allows users to directly handle the sintering process of the model on a 3D printer.
PartPro120 xP is a XYZPrinting 3D printer working in UFF TM (Ultra Fast Film) / DLP technology with a working area of 114 x 64 x 100 mm. The printer is designed for printing...
PartPro150 xP is a 3D printer by XYZPrinting, working in SL (Stereolithography SLA) technology with a working area of 150 x 150 x 200 mm. The printer is designed for the...
PartPro100 xP is a 3D printer working in DLP technology with a working area of 64 x 40 x 120 mm. The printer is intended for the production of models that require high...
PartPro300 xT is a printer working in FFF technology with a working area of 195 x 270 x 300 mm for a double extruder and 295 x 300 x 300 mm for a single extruder. The device...
Epsilon W27 is an industrial 3D printer working in FFF technology with a working area of 420 x 300 x 220 mm. The printer has a passively heated chamber and full enclosure,...
Ultimaker S3 is equipped with the latest technology 3D printer with a working area of 230 x 190 x 200 mm. Provides high quality prints and the ability to use composite...
The ATMAT Jupiter 3D printer is one of the largest industrial class 3D printers in Europe with a working area of 2000 x 1000 x 1000 mm. It is equipped with the latest...
The ATMAT Signal Pro 3D printer works in FFF (FDM) technology. The possibility of choosing the size of the working field allows it to be perfectly adapted to individual needs....
PartPro350 xBC is a 3D printer working in Binder Jetting technology with a working area of 222 x 350 x 200 mm. The PartPro350 xBC offers full color 3D printing, combining all...
Da Vinci Super is a printer with the largest workspace from the models in the XYZprinting offer. It is compatible with many types of filaments, which allows the user to print...
The ATMAT Saturn 3D printer is intended for the production of large-size models in incremental technology. The device has a working area of 1200 x 1000 x 1000 mm. The printer...
Zortrax M300 Dual is a 3D printer equipped with two heads with a large work area, with a Wi-Fi module and an Ethernet port. It allows creating a 3D printer farm capable of...
3DGence Double is a two-head 3D printer that uses two materials during the printout: model and support. The device is intended for professional use. The printer is...
XYZprinting's da Vinci Color is the world's first full-color 3D printer with FFF technology. Not only does the da Vinci Color's inkjet technology provide full-color prints,...
Zortrax ENDUREAL is an industrial 3D printer with a working area of 400 x 300 x 300 mm, which has advanced temperature management, enabling work with high-strength polymers.
The 3DGence INDUSTRY F340 printer includes interchangeable modules that allow you to customize the device to your needs. The 3DGence INDUSTRY F340 printer...
PartPro100 xP is a 3D printer working in DLP technology with a working area of 64 x 40 x 120 mm. The printer is intended for the production of models that require high...
Ultimaker 2+ Connect is a 3D printer operating in FFF technology with a working area of 223 x 220 x 205 mm. Equipped with new network functions and a new touch screen, it...
The Raise3D E2 printer is a device working in FFF technology with two independent extruders. The working field changes with the number of extruders used. For a single extruder,...