PartPro350 xBC is a 3D printer working in Binder Jetting technology with a working area of 222 x 350 x 200 mm. The PartPro350 xBC offers full color 3D printing, combining all stages of curing, coloring and printing at the same time.
PartPro350 xBC is a 3D printer working in Binder Jetting technology with a working area of 222 x 350 x 200 mm. The PartPro350 xBC offers full color 3D printing, combining all stages of curing, coloring and printing at the same time. The PartPro350 xBC has a high color resolution (1600 dpi), which guarantees high quality of the printed models.
The PartPro350 xBC 3D Printer is equipped with a removable work table, which enables more efficient 3D printing. The user can replace the table with a ready printout with a new one in order to immediately start another printout. The removable table provides a cleaner solution for powder removal and greatly improves printing efficiency.
The 3D printer allows you to use the BCPware software, which is designed to effectively prepare the model for printing using two 3D printing modes. The first one offers immediate cuts and printing, while the second one allows cutting and printing at a later time.
The PartPro350 xBC 3D Printer uses the Binder Jetting technology, which is based on the use of liquid binders, which are responsible for bonding sand, metal and ceramics. Binder Jetting is an industrial technology and is used in the production of molds and foundry cores, which are intended for pouring with liquid metals. This technology is distinguished primarily by the lack of the need for supports and the ability to print fully cortical 3D models.
The PartPro350 xBC uses Binder Jetting technology, which allows you to print high-quality 3D models in full color and even the most complex geometries.
The 3D printer is equipped with a replaceable work table module that allows you to replace the table with a ready printout with a new one in order to immediately start a new print and improve production efficiency.
The PartPro350 xBC 3D Printer uses XYZprint AM 3DP software which allows you to use two printing modes. The first mode allows you to cut and print immediately, and the second mode allows you to cut and print at a later time.
The PartPro350 xBC offers state-of-the-art printhead technology that delivers industry-leading color part productivity. The printer works at a speed of up to 18 mm per hour, which makes it much faster than other printers working in other technologies.
PartPro350 xBC 3D Printer works in Binder Jetting technology which allows you to create models of high quality and in full color.
The PartPro350 xBC allows you to create figurines that show off realistic poses and folds in a dress. The printed models in full color are distinguished by high quality and durability.
The PartPro350 xBC 3D Printer allows you to print 3D models in full color and with complex shapes without the need for supports and auxiliary materials.
The printer allows you to create 3D models using gypsum material that has properties similar to ceramics. After polishing and painting, we can obtain the desired quality of the object.
The XYZprinting company offers a comprehensive range of materials, allows you to find the right material for external components and model parts. The PartPro350 xBC 3D Printer supports materials such as BuiltPro Powder. This allows you to create models in full color and high quality.
XYZprint AM 3DP software enables you to work efficiently in two modes. In the first mode, it is possible to cut and print immediately, while in the second mode it is possible to cut and print at a later time. The user can easily supervise and maintain the printer. The program calculates the cost of the next print and saves the cost of previous prints in the history, which allows you to control and optimize the materials used during the 3D printing process. The software is only compatible with the PartPro350 xBC 3D printer.
PartPro120 xP is a XYZPrinting 3D printer working in UFF TM (Ultra Fast Film) / DLP technology with a working area of 114 x 64 x 100 mm. The printer is designed for printing...
PartPro150 xP is a 3D printer by XYZPrinting, working in SL (Stereolithography SLA) technology with a working area of 150 x 150 x 200 mm. The printer is designed for the...
PartPro300 xT is a printer working in FFF technology with a working area of 195 x 270 x 300 mm for a double extruder and 295 x 300 x 300 mm for a single extruder. The device...
MfgPro230 xS is a 3D printer working in SLS (Selective Laser Sintering) technology with a working area of 230 x 230 x 230 mm. The MfgPro230 xS is designed for the production...
Perfect for anyone who is just getting started with 3D printing, it does not matter if you are a child, a teenager or an adult.
A 3D printer with a large work area, with a Wi-Fi module and an Ethernet port. It allows creating a 3D printer farm capable of printing large models in one work cycle.
Zortrax Inkspire 3D Printer - a new quality of photopolymer resin printing. Prints up to 8 times faster and up to 9 times more accurate than leading SLA 3D printers.
The 3D printer and scanner DA VINCI 1.0 PRO 3W1 is a device working in FFF technology (FUSED FILAMENT FABRICATION) with a maximum print size of 200 x 200 x 190 mm. The printer...
PartPro150 xP is a 3D printer by XYZPrinting, working in SL (Stereolithography SLA) technology with a working area of 150 x 150 x 200 mm. The printer is designed for the...
3D printer DA VINCI 1.0 PRO is a device working in FFF technology (FUSED FILAMENT FABRICATION) with a maximum print size of 200 x 200 x 200 mm. The printer allows wireless...
XYZprinting's da Vinci Color is the world's first full-color 3D printer with FFF technology. Not only does the da Vinci Color's inkjet technology provide full-color prints,...
PartPro100 xP is a 3D printer working in DLP technology with a working area of 64 x 40 x 120 mm. The printer is intended for the production of models that require high...
MfgPro230 xS is a 3D printer working in SLS (Selective Laser Sintering) technology with a working area of 230 x 230 x 230 mm. The MfgPro230 xS is designed for the production...
BCN3D Sigma D25 is a 3D printer working in FFF technology with a working area of 420 x 300 x 200 mm. The device is equipped with a system of two independent IDEX extruders,...
The Raise3D E2 printer is a device working in FFF technology with two independent extruders. The working field changes with the number of extruders used. For a single extruder,...
BLIXET B120-MS is a 3D printer of the MS series working in FFF technology with a working area of 720 x 720 x 1200 mm. The printer is available with one or two printheads.
Zortrax 3D printers triumph in the largest rankings of desktop 3D devices. Zortrax M200 PLUS is a printer enriched with modern functionalities.
PartPro120 xP is a XYZPrinting 3D printer working in UFF TM (Ultra Fast Film) / DLP technology with a working area of 114 x 64 x 100 mm. The printer is designed for printing...
The Ultimaker S5 3D Printer is an easy-to-use device with a large work area that ensures accurate and reproducible industrial-quality prints. Ultimaker S5 has a reliable...
PartPro350 xBC is a 3D printer working in Binder Jetting technology with a working area of 222 x 350 x 200 mm. The PartPro350 xBC offers full color 3D printing, combining all stages of curing, coloring and printing at the same time.
