Please be advised that our online store uses cookie technology and at the same time does not automatically collect any information, except for the information contained in these files (so-called "cookies").
Fiberlogy PET-G filament blue
  • Fiberlogy PET-G filament blue

Fiberlogy PET-G filament

zł68.29 tax excl.
zł84.00 tax incl.

Fiberlogy PET-G filament is a durable material resistant to acids, salts and alkaline substances, which allows the creation of functional prototypes and finished products.

Diameter
  • 1,75mm
Color
  • Grey
  • Red
  • Orange
  • Blue

Weight
  • 0.85 kg
Quantity
Out-of-Stock


Fiberlogy PET-G filament

Fiberlogy PET-G filament

Fiberlogy PET-G filament is a durable material resistant to acids, salts and alkaline substances, which enables the creation of functional prototypes and finished products. PET-G contains glycol, which increases the material's impact resistance and ensures less shrinkage. A closed chamber during printing is not required.

Fiberlogy PET-G filament

Fiberlogy PET-G

Fiberlogy PET-G filament has high strength and low susceptibility to shrinkage. It is resistant to acids, salts and alkaline substances. Fiberlogy PET-G has strong adhesion, therefore it is not recommended to print directly on the surface of the table or glass, as it may damage it. The use of masking tape is recommended. The recommended printing temperature with the use of Fiberlogy PET-G filament is 230-250°C, while the bed temperature should reach 90°C.

Due to its properties, Fiberlogy PET-G filament is used in the creation of finished products and prototypes such as containers, handles, bottles and packaging. It is also used in the production of decorations and jewelry such as lamps, rings, necklaces and bracelets.

Recommended print settings

Printing temperature
230-250°C
Table temperature
90°C
Closed chamber
not required
Airflow
0-25%
Flowrate
95-105%
Print speed
35-60 mm/s
Subsoil
masking tape
Direct retraction
yes, 2-3 mm
Bowden Retraction
yes, 3-5 mm
Retraction speed
20-45 mm/s

Data sheet

Diameter tolerance
+/- 0.02 mm
Oval tolerance
+ 0.01 mm
Print temperature
230°C – 250°C
Table temperature
90 °C
Filament type
PETG
Weight
0.85 kg
fiberlogy_petg

Data sheet

Diameter tolerance
+/- 0.02 mm
Oval tolerance
+ 0.01 mm
Print temperature
230°C – 250°C
Table temperature
90 °C
Filament type
PETG
Weight
0.85 kg

Specific References

You might also like