Drukarka 3D BLIXET B120-MS

BLIXET B120-MS is a 3D printer of the MS series working in FFF technology with a working area of ​​720 x 720 x 1200 mm. The printer is available with one or two printheads.

FREE SHIPPING
Heads count
  • Single
  • Duo
Quantity

help_outlineAsk about price
Drukarka 3D BLIXET B120-MS

Drukarka 3D BLIXET B120-MS

 

BLIXET B120-MS 3D printer

BLIXET B120-MS 3D printer

BLIXET B120-MS is a 3D printer of the MS (Modular - System) series working in FFF technology with a working area of ​​720 x 720 x 1200 mm. The printer has a feeder installed in the upper part of the device for spools up to 20 kg, which is made on the order of customers with a minimum order of 5 spools weighing 20 kg each. In the standard version there is a feeder inside the printer, where you can print with filaments on spools up to 10 kg in weight with a bearing bearing low resistance to guide the material.

BLIXET B120-MS 3D printer

BLIXET B120-MS

BLIXET B120-MS 3D printer has a new control electronics that allows full device diagnostics and control via WiFi. It has a built-in function for entering control commands as well as diagnostics and reading of calibration parameters. The 3D printer has implemented, among others proprietary Silence X system, which ensures extremely quiet operation during printing, and a print smoothing system. The printer has a steel, lockable casing hidden by built-in panels, which perfectly protects the printout against air blasts and ensures passive heating of the heating chamber.

BLIXET B120-MS is a printer designed from the ground up using many years of experience in the production and sale of 3D printers in FFF (FDM) technology. The device has been designed to meet the needs of customers, whose requirements are not always specified when buying printers. After a long work with 3D printers, there is a need to retrofit the device with additional parameters, such as heating the chamber, platforms with the filament function. The design of the MS series devices has been constructed so that the printer can be retrofitted with further elements.

BLIXET B120-MS 3D printer

The 3D BLIXET B120-MS 3D printer can be retrofitted

The BLIXET B120-MS 3D printer can be retrofitted during the purchase process and after purchase. The device can be equipped with such modules as:

  • Chamber heating up to 70 ° C with chamber insulation and control
  • Sero-motors with absolute encoder XY axis
  • Innovative system for automatic drying of the filament chamber with the function of humidity detection and removal outside the DRY FLOW ™ chamber
  • Extended warranty up to 60 months, price 15% of the device value for each subsequent year (including diagnostic service once a year and replacement of used components)
  • Adhesive pads for special materials
  • Vacuum table with adhesive pad (pressurized air supply required)
  • additional external air filtration in the room, a system of 8 filters with automatic measurement of humidity and particle concentration as well as filter wear (a set of replacement cartridges included)
  • personalization for specific materials (filaments) including production of materials to order and adaptation of the device for these materials to 15 kg spools depending on the type of filament together with the material feeding system

Data sheet

Print Technology
FFF (FDM)
Print temperature
Max. 500° C
Working area
720 x 720 x 1200 mm
Filament diameter
1,75 mm / 2,85 mm
Layer resolution
50-400 microns (0.2-0.8 mm nozzles) standard module 300-1000 microns (0.6-1.4 mm nozzles) (Super-Fast ™ module for fast printing)
Build Plate
Heated, removable ceramic tile
Max Build Plate Temperature
130° C
Connectivity
Wi-F or Ethernet, micro SD card
Software
Simplify 3D, Cura, other
File Types
STL, OBJ, 3MF
Operating systems
Mac OS / Windows
Printhead
With its own cooling
Sensors
Magnetic material sensor
Table leveling
Automatic before each print
Rodzaj drukarki
FFF, FDM, LPD
Maximum count of heads
2
Touchscreen
“7
Diameter of the nozzle
0.2 - 0.8 mm (standard module) 0.6 - 1.4 mm Module for quick prints (Super-Fast ™)
Current
230 V ~ 4 A 50/60 Hz
Power consumption
2300 W (heating the set) during operation ~ 600 W
blixet_b120ms

Data sheet

Print Technology
FFF (FDM)
Print temperature
Max. 500° C
Working area
720 x 720 x 1200 mm
Filament diameter
1,75 mm / 2,85 mm
Layer resolution
50-400 microns (0.2-0.8 mm nozzles) standard module 300-1000 microns (0.6-1.4 mm nozzles) (Super-Fast ™ module for fast printing)
Build Plate
Heated, removable ceramic tile
Max Build Plate Temperature
130° C
Connectivity
Wi-F or Ethernet, micro SD card
Software
Simplify 3D, Cura, other
File Types
STL, OBJ, 3MF
Operating systems
Mac OS / Windows
Printhead
With its own cooling
Sensors
Magnetic material sensor
Table leveling
Automatic before each print
Rodzaj drukarki
FFF, FDM, LPD
Maximum count of heads
2
Touchscreen
“7
Diameter of the nozzle
0.2 - 0.8 mm (standard module) 0.6 - 1.4 mm Module for quick prints (Super-Fast ™)
Current
230 V ~ 4 A 50/60 Hz
Power consumption
2300 W (heating the set) during operation ~ 600 W

Specific References